How to Connect TradingView to MT5: 3 Ways That Work

0
12
How to Connect TradingView to MT5: 3 Ways That Work: title card from ForexMT4Indicators.com

Last updated: November 18, 2026 · By: Tim Morris

TradingView has no built-in connection to MT5, but two ways reach it and a third skips it. Rebuild the Pine Script (TradingView’s coding language) in MQL5 (MT5’s language) so it runs inside MT5, or relay alerts through a webhook bridge to an Expert Advisor (EA) on an always-on MT5 terminal. Or trade your broker account from TradingView’s chart.

Three ways to connect TradingView to MT5Three side-by-side cards: rebuild the Pine Script in MQL5 so it runs inside MT5, relay TradingView alerts through a webhook bridge to an EA on MT5, or trade a broker account from the TradingView chart without MT5, with what each needs and who it suits.Three ways to connect TradingView to MT5No built-in link exists: two routes reach MT5, and the third skips it.1Rebuild in MQL5Pine Script rewrittenPine Script sourceRewritten in MQL5Runs inside MT5Needsthe Pine source codeBest forindicators and EAs in MT5native, testable in MT52Webhook bridgeAlerts turned into ordersTradingView alertWebhook to a bridgeEA on MT5 places orderNeedsa paid TradingView plan,a bridge and a VPSBest forTradingView as the brainmost moving parts3Broker integrationFrom TradingView chartsTradingView chartYour broker accountMT5 not involvedNeedsa broker that integratesBest forplacing trades by handmanual, no automationNative MQL5 cannot receive a TradingView webhook by itself.TradingView plans, bridge services and broker integrations change. Checked 18 November 2026.
The three working routes from TradingView to MT5: rebuild the Pine Script in MQL5, relay alerts through a webhook bridge to an EA, or trade a broker account from TradingView's chart without MT5.

Our MetaTrader 5 platform guide and roundup of forex trading software cover the two platforms themselves. This guide covers the link between them.

Can TradingView connect directly to MT5?

No. TradingView scripts and alerts run on TradingView’s servers, while MT5 is a program on your computer or VPS (virtual private server: a rented computer that stays on 24/7) that talks to your broker. Neither comes with a link to the other.

The blocker sits on the MT5 side. Programs inside MT5 can reach out to a web server, but the MQL5 network documentation lists no function for taking in a message pushed from outside. So a TradingView alert has nowhere to land inside the terminal. MT5’s built-in MCP server (Model Context Protocol), added in build 6060 (23 July 2026), does not change this: it serves AI apps that hold its API key, on a local address (127.0.0.1) in MetaQuotes’ setup examples.

A TradingView strategy does not reach MT5 either: it backtests and sends alerts, and places no orders in MetaTrader. Ways 1 and 2 work for MT4 too, with MQL4 in place of MQL5 (MQL4 has WebRequest() but no socket functions).

Which way should you use?

WayBest forWhat you needMain weakness
1. Rebuild in MQL5Indicators and EAs that run and backtest inside MT5The Pine source code, plus MQL5 skills or a developerProtected scripts cannot be rebuilt without the author’s code
2. Webhook bridgeKeeping the script on TradingView while MT5 executesA paid TradingView plan with webhooks, two-factor login, a bridge and an always-on MT5Five stages, and each one can fail
3. Broker integrationPlacing trades by hand from TradingView chartsA broker that integrates with TradingView, often on a specific account typeNo MT5 and no automation of your script

Our rule of thumb: if the logic is settled and you want to backtest it on your broker’s data, rebuild it. If you change the script weekly, a bridge saves a rewrite each time. Unsure whether to automate at all? Our forex robots vs manual trading comparison covers that first.

Way 1: Rebuild the Pine Script in MQL5

A rebuild rewrites the Pine logic in MQL5 so it runs natively in MT5, as an indicator that plots and alerts or as an EA (a program that trades automatically inside MT5). Nothing outside MetaTrader has to stay online.

You need the source. Open the script in TradingView’s Pine Editor and copy it; if the editor will not show the code, the script is invite-only or protected and cannot be converted without its author. MetaTrader works the same way: you edit the .mq5 source, not the compiled .ex5, as we explain in EX4 vs MQ4.

Check the //@version= line near the top of the script (published scripts often start with a licence comment). Versions 5 and 6 use ta. names; older v4 scripts use names without the ta. prefix (ema() instead of ta.ema()).

The Pine to MQL5 mapping table

Pine ScriptMQL5 equivalentWatch for
input.int(20, "Fast EMA")input int InpFastLen = 20;Use input group to keep inputs tidy
ta.ema(close, 20)iMA(_Symbol, PERIOD_CURRENT, 20, 0, MODE_EMA, PRICE_CLOSE), read with CopyBuffer()Early values differ if history starts on different bars
ta.crossover(a, b)a[i] > b[i] && a[i-1] <= b[i-1] on a closed barPine also evaluates the forming bar
request.security(sym, "240", expr)The same calculation on PERIOD_H4, using its last closed barRepaints on a forming bar; use expr[1] with lookahead_on, never lookahead_on alone
alertcondition(cond, title, message)Alert() and SendNotification(), once per closed barThe message is a constant string with {{placeholders}}
strategy.entry("Long", strategy.long)CTrade.Buy() inside an EA, with a stop, lot sizing and a magic numberstrategy.entry reverses an open position by default

The last two rows cause the most trouble. alertcondition() only creates a condition you can attach an alert to; it trades nothing. And strategy.entry() runs on TradingView’s broker emulator, so an EA built from it needs real order handling, stop-level checks and position sizing. Our guide to creating an expert advisor covers those parts, and a short rule set may suit an EA builder with no code.

Worked example: an EMA cross alert from Pine v6 to MQL5

Not coding this yourself? Skip to Way 2, or see “Rather have it built?” below.

Here is a small Pine Script v6 indicator: a 20 and 50 EMA (Exponential Moving Average), arrows on crosses, and two alert conditions, the same 20/50 cross our EA tutorial automates.

//@version=6
indicator("EMA Cross Alert", overlay = true)

fastLen = input.int(20, "Fast EMA length", minval = 1)
slowLen = input.int(50, "Slow EMA length", minval = 2)

fastEma = ta.ema(close, fastLen)
slowEma = ta.ema(close, slowLen)

crossUp   = ta.crossover(fastEma, slowEma)
crossDown = ta.crossunder(fastEma, slowEma)

plot(fastEma, "Fast EMA", color.blue)
plot(slowEma, "Slow EMA", color.orange)
plotshape(crossUp,   "Cross up",   shape.triangleup,   location.belowbar, color.green)
plotshape(crossDown, "Cross down", shape.triangledown, location.abovebar, color.red)

alertcondition(crossUp,   "EMA cross up",   "{{ticker}} fast EMA crossed above slow EMA, close {{close}}")
alertcondition(crossDown, "EMA cross down", "{{ticker}} fast EMA crossed below slow EMA, close {{close}}")

Here is the MQL5 rebuild, compiled in MetaEditor with 0 errors and 0 warnings on 18 November 2026. It reproduces the Pine logic step for step (the same EMA formula and the same crossover test), with three deliberate choices:

  • Closed bars only. The cross check skips the forming bar, so an arrow cannot appear and then vanish before the bar closes, the way a Pine alert on the forming bar can.
  • One alert per closed bar. The alert fires once, after the crossing bar closes, and stays quiet while history loads.
  • The same smoothing. iMA in EMA mode uses the same smoothing factor as ta.ema, 2 / (length + 1).

Expect small differences from TradingView’s arrows where the two price feeds print different candles or load different amounts of history.

//+------------------------------------------------------------------+
//| EmaCrossAlert.mq5                                                |
//| MT5 rebuild of the Pine Script v6 "EMA Cross Alert" example.     |
//| Signals use CLOSED bars only, so an arrow stays where it prints. |
//+------------------------------------------------------------------+
#property copyright "ForexMT4Indicators.com"
#property link      "https://forexmt4indicators.com/connect-tradingview-to-mt5/"
#property version   "1.00"
#property description "Fast and slow EMA, cross arrows and alerts on closed bars."

#property indicator_chart_window
#property indicator_buffers 4
#property indicator_plots   4
#property indicator_label1  "Fast EMA"
#property indicator_type1   DRAW_LINE
#property indicator_color1  clrDodgerBlue
#property indicator_label2  "Slow EMA"
#property indicator_type2   DRAW_LINE
#property indicator_color2  clrOrange
#property indicator_label3  "Cross up"
#property indicator_type3   DRAW_ARROW
#property indicator_color3  clrLimeGreen
#property indicator_width3  2
#property indicator_label4  "Cross down"
#property indicator_type4   DRAW_ARROW
#property indicator_color4  clrRed
#property indicator_width4  2

//--- inputs (Pine: input.int / input.bool)
input group "EMAs"
input int  InpFastLen = 20;     // Fast EMA length
input int  InpSlowLen = 50;     // Slow EMA length
input group "Alerts"
input bool InpPopup   = true;   // Pop-up alert in the terminal
input bool InpPush    = false;  // Push notification to the MT5 mobile app

//--- buffers and globals
double   FastBuffer[], SlowBuffer[], UpBuffer[], DownBuffer[];
int      fastHandle   = INVALID_HANDLE;
int      slowHandle   = INVALID_HANDLE;
datetime lastAlertBar = 0;

//+------------------------------------------------------------------+
int OnInit()
{
   if(InpFastLen < 1 || InpSlowLen <= InpFastLen)
   {
      Print("Check inputs: the slow EMA must be longer than the fast EMA");
      return(INIT_PARAMETERS_INCORRECT);
   }

   SetIndexBuffer(0, FastBuffer, INDICATOR_DATA);
   SetIndexBuffer(1, SlowBuffer, INDICATOR_DATA);
   SetIndexBuffer(2, UpBuffer,   INDICATOR_DATA);
   SetIndexBuffer(3, DownBuffer, INDICATOR_DATA);
   PlotIndexSetInteger(2, PLOT_ARROW, 233);   // Wingdings up arrow
   PlotIndexSetInteger(3, PLOT_ARROW, 234);   // Wingdings down arrow
   for(int p = 0; p < 4; p++)
   {
      PlotIndexSetDouble(p, PLOT_EMPTY_VALUE, EMPTY_VALUE);
      PlotIndexSetInteger(p, PLOT_DRAW_BEGIN, InpSlowLen);
   }

   // Pine: ta.ema(close, len)  ->  MQL5: an iMA handle in EMA mode on the close
   fastHandle = iMA(_Symbol, PERIOD_CURRENT, InpFastLen, 0, MODE_EMA, PRICE_CLOSE);
   slowHandle = iMA(_Symbol, PERIOD_CURRENT, InpSlowLen, 0, MODE_EMA, PRICE_CLOSE);
   if(fastHandle == INVALID_HANDLE || slowHandle == INVALID_HANDLE)
   {
      Print("iMA handle failed, error ", GetLastError());
      return(INIT_FAILED);
   }

   IndicatorSetString(INDICATOR_SHORTNAME, StringFormat("EMA Cross (%d/%d)", InpFastLen, InpSlowLen));
   IndicatorSetInteger(INDICATOR_DIGITS, _Digits);
   return(INIT_SUCCEEDED);
}

//+------------------------------------------------------------------+
void OnDeinit(const int reason)
{
   if(fastHandle != INVALID_HANDLE) IndicatorRelease(fastHandle);
   if(slowHandle != INVALID_HANDLE) IndicatorRelease(slowHandle);
}

//+------------------------------------------------------------------+
//| Copy the newest 'count' values of a handle into dst, keeping the |
//| oldest-first index that matches time[] and close[].              |
//+------------------------------------------------------------------+
bool CopyTail(const int handle, const int count, const int total, double &dst[])
{
   double tail[];
   ArraySetAsSeries(tail, false);
   if(CopyBuffer(handle, 0, 0, count, tail) < count)
      return(false);
   ArrayCopy(dst, tail, total - count, 0, count);
   return(true);
}

//+------------------------------------------------------------------+
int OnCalculate(const int rates_total, const int prev_calculated,
                const datetime &time[], const double &open[],
                const double &high[], const double &low[],
                const double &close[], const long &tick_volume[],
                const long &volume[], const int &spread[])
{
   if(rates_total < InpSlowLen + 3)
      return(0);
   if(BarsCalculated(fastHandle) < rates_total || BarsCalculated(slowHandle) < rates_total)
      return(prev_calculated);                 // EMAs not ready yet, try again next tick

   int start;
   if(prev_calculated == 0)
   {
      start = InpSlowLen + 1;
      ArrayInitialize(UpBuffer,   EMPTY_VALUE);
      ArrayInitialize(DownBuffer, EMPTY_VALUE);
   }
   else
      start = prev_calculated - 1;             // the bar that just closed plus the forming bar

   int need = rates_total - start + 1;          // one extra older bar for the [i - 1] reads
   if(!CopyTail(fastHandle, need, rates_total, FastBuffer)) return(prev_calculated);
   if(!CopyTail(slowHandle, need, rates_total, SlowBuffer)) return(prev_calculated);

   for(int i = start; i < rates_total; i++)
   {
      UpBuffer[i]   = EMPTY_VALUE;
      DownBuffer[i] = EMPTY_VALUE;
      if(i == rates_total - 1)
         continue;                              // forming bar: no signal until it closes

      // Pine: ta.crossover(fast, slow) = above now, and at or below on the bar before
      bool crossUp   = FastBuffer[i] > SlowBuffer[i] && FastBuffer[i - 1] <= SlowBuffer[i - 1];
      bool crossDown = FastBuffer[i] < SlowBuffer[i] && FastBuffer[i - 1] >= SlowBuffer[i - 1];
      if(crossUp)   UpBuffer[i]   = low[i];
      if(crossDown) DownBuffer[i] = high[i];

      // Pine: alertcondition(). Alert once, for the bar that just closed, never on the first load
      if((crossUp || crossDown) && i == rates_total - 2 && prev_calculated > 0 && time[i] != lastAlertBar)
      {
         lastAlertBar = time[i];
         string msg = StringFormat("%s %s: fast EMA crossed %s slow EMA, close %s",
                                   _Symbol, EnumToString(Period()), crossUp ? "above" : "below",
                                   DoubleToString(close[i], _Digits));
         if(InpPopup) Alert(msg);
         if(InpPush)  SendNotification(msg);
      }
   }
   return(rates_total);
}
//+------------------------------------------------------------------+

To install it:

  1. In MT5, choose File, then Open Data Folder, and save the file in MQL5\Indicators.
  2. Open the file in MetaEditor (F4 from MT5) and press Compile (F7).
  3. Drag the indicator from the Navigator onto a chart. Both EMAs should plot, with arrows on past crosses.
  4. Where a cross sits a bar away from TradingView’s, compare the two feeds’ candles before you blame the code.

The request.security repaint trap

Repainting means a signal that looked valid on the chart later moves or disappears. request.security() pulls data from another timeframe or symbol, and on the forming bar it can return a higher-timeframe value that is still moving. The Pine Script repainting documentation recommends requesting the previous bar’s value and turning lookahead on together, for example request.security(syminfo.tickerid, "240", close[1], lookahead = barmerge.lookahead_on). Never use lookahead_on without the [1]: on historical bars it reads the higher-timeframe close before that bar has finished.

In the MT5 rebuild, read the last closed higher-timeframe bar, never the forming one. Expect fewer and later signals than the TradingView chart shows in hindsight; that is the honest result. Our guide to repainting indicators shows how to spot this before you trust a backtest.

Way 2: Send TradingView alerts to MT5 through a webhook bridge

A bridge keeps your script on TradingView and turns its alerts into MT5 orders. TradingView sends a webhook (an automatic message to a web address the moment an alert fires) to a bridge service, and an EA on your MT5 terminal collects the instruction and places the order. The chain has five stages: the TradingView alert, the webhook, the bridge service, the EA on MT5 and the broker server that fills the order.

Because MQL5’s own functions cannot accept an incoming connection, the EA normally connects out to the bridge, through WebRequest() or a socket. The WebRequest documentation adds three limits: the address must be on the allowed-URL list under Tools, Options, Expert Advisors; the function cannot run from an indicator; and it does not run in the Strategy Tester.

How to connect TradingView alerts to MT5, step by step

  1. Choose a plan with webhooks and turn on 2FA. On the TradingView pricing page, webhook notifications come with Essential, Plus, Premium and Ultimate, not the free Basic plan (checked 18 November 2026). TradingView’s webhook help page only allows webhook alerts with two-factor authentication (2FA) enabled.
  2. Sign up for a bridge and copy its webhook URL and secret token. The secret token is a private code that goes in every alert message, so the bridge can reject orders that did not come from you. PineConnector and TradingConnector are examples, not endorsements; check that the one you pick supports your platform and broker.
  3. Install the bridge’s EA in MT5. If its instructions ask for it, add the bridge’s address to the allowed-URL list under Tools, Options, Expert Advisors.
  4. Turn on Algo Trading and keep MT5 running. Algo Trading is the toolbar button that lets EAs trade; a VPS keeps the terminal online whenever an alert can arrive.
  5. Create the alert. For an indicator condition, set the trigger to Once per bar close, so it fires on a closed bar, not a cross that later disappears. Strategy alerts have no trigger setting: they fire when the strategy’s orders fill, and by default a strategy recalculates only at bar close (calc_on_every_tick changes that).
  6. Paste the webhook URL and the message. Turn on the webhook option in the alert, paste the bridge’s URL and write the message in the bridge’s format with your secret token. Placeholders such as {{ticker}}, {{close}} and, in strategy alerts, {{strategy.order.action}} fill in live values. Never put your MT5 password in the message; TradingView’s help page warns against credentials in the webhook body.
  7. Map symbols and lot sizes. TradingView’s EURUSD might be EURUSD.m at your broker, and gold might be XAUUSD or GOLD. A lot is a standard trade size, but contract sizes vary by broker and symbol, so set the size for each one.
  8. Test on a demo MT5 account, matching every entry in the alert log to a trade in the MT5 journal.
Where a TradingView-to-MT5 webhook bridge can failThe five stages of a TradingView-to-MT5 bridge, from the TradingView alert through the webhook, the bridge service and the EA on an always-on MT5 terminal to the broker server, with the failures that can happen at each stage.Where a TradingView-to-MT5 bridge can failFive stages from alert to fill. Each one can break on its own.1TradingView alerton TradingView’s servers!Indicator alerts can fire on the forming barStopped when it hits 15 triggers in 3 minutesExpires after 2 months on Essential and Plus2Webhooka POST to port 80 or 443!Cancelled if the bridge takes over 3 secondsCan occasionally fail to arrive: check the alert logA leaked URL with no secret lets anyone send orders3Bridge servicethird-party relay!An outage or backlog delays or drops the orderDuplicate alerts become duplicate ordersMessage format must match what the EA expects4EA on MT5always-on terminal or VPS!Terminal closed, PC asleep or Algo Trading offConnects out: native MQL5 cannot accept a webhookWrong symbol name or lot size (XAUUSD vs GOLD)5Broker serverfills the order!Slippage between the alert price and the fillRejected stops or requotes around newsMarket closed or symbol not tradableTradingView limits from tradingview.com, checked 18 November 2026. Bridge behaviour varies by service.
The five stages of a TradingView-to-MT5 bridge, from the TradingView alert through the webhook, the bridge service and the EA on an always-on MT5 terminal to the broker server, with the failures that can happen at each stage.

Where the bridge breaks

Latency. The signal crosses the internet twice before the EA collects it. Seconds are harmless on H1 or H4 (one-hour or four-hour) charts, but costly on M1 (one-minute) scalps around news.

Missed alerts. TradingView cancels a webhook request if the receiving server takes longer than three seconds, and says webhooks may occasionally fail to arrive. Check the webhook status column in the alert log.

Duplicate alerts. Two alerts on the same condition become two orders unless the EA checks an ID or bar time before trading.

A leaked webhook URL. Anyone who has the URL can send orders through the bridge unless it checks the secret token in each message. Keep both private, and ask the bridge for new ones if they leak.

Stopped and expired alerts. TradingView caps a regular alert at 15 triggers in 3 minutes and stops it when it hits that cap, under its alert-frequency rule. On Essential and Plus, alerts expire after two months; Premium and Ultimate alerts can run without expiry (checked 18 November 2026).

Stale script versions. TradingView saves a copy of the script and its inputs when you create an alert, so later edits do not reach running alerts.

A switched-off terminal. If the PC sleeps or Algo Trading is off, alerts arrive and nothing trades. Bridge users run MT5 on a VPS; our forex VPS cost calculator helps you price one, and our team offers MT5 install and VPS setup if you would rather not do it yourself.

Way 3: Trade your broker account from TradingView’s chart

This route connects TradingView to your broker, not to the MT5 terminal. You log in through TradingView’s trading panel and place orders on its chart; the account you connect is often not your MT5 account.

Only some brokers integrate, often through their own account type. TradingView’s Tickmill support page says the connection uses a Tickmill Trader Raw account and is not offered to clients based in the EU and the UK; our Tickmill TradingView guide covers that route. Our FXOpen TradingView guide explains why you should confirm eligibility with your FXOpen entity before funding.

Our JustMarkets TradingView guide shows a different trap: TradingView-powered charts inside a broker’s own web terminal are not a TradingView brokerage connection, even when the charts look identical.

Before opening an account, ask the broker which account type connects and whether it accepts residents of your country. This route places trades by hand; automating your Pine strategy still needs Way 1 or Way 2.

Why will TradingView and MT5 results never match exactly?

Different price feeds. A TradingView forex chart may come from a different data provider than your broker, so highs, lows and closes differ by a few points (a point is the smallest price step your broker quotes). MT5 forex charts are built from Bid prices (the price you sell at; you buy at the higher Ask), per the MetaTrader 5 price data help, which can move a cross by a bar.

Different candle times. Broker server time zones vary, so H4 and D1 candles in MT5 may start at a different hour from the TradingView chart.

Repainting. Alerts on the forming bar and request.security() calls that read forming higher-timeframe bars show signals that a closed-bar MT5 rebuild never takes.

Fill models. On historical bars, TradingView’s broker emulator acts after each bar closes and assumes a price path inside the candle. MT5’s Strategy Tester uses your broker’s history, spread (the gap between Bid and Ask) and commission, so totals differ.

Common mistakes when connecting TradingView to MT5

  1. Trying to convert a protected script. Without the source, nobody can rebuild it faithfully. Fix: ask the author for the code or an official MT5 version.
  2. Trading indicator alerts set to Once per bar. They can fire on the forming bar, on a cross that does not survive the close. Fix: use Once per bar close.
  3. Editing the script and keeping the old alert. Running alerts use the version saved at creation. Fix: recreate the alert after every edit.
  4. Symbol and lot mismatches. An unmapped symbol name or contract size sends the wrong order, or none. Fix: map every symbol and lot size, then test on demo.

Does gold (XAU/USD) need extra care?

Yes, mostly on the bridge route. Gold moves fast around US releases such as NFP (Non-Farm Payrolls) and CPI (Consumer Price Index), so the seconds between alert and fill cost more. On a broker where 1.00 lot is 100 ounces, a fill $2 per ounce worse than the alert price (that gap is called slippage) costs $200 per lot.

Contract sizes vary by broker, so check the specification in MT5 and test the full chain on a demo XAU/USD chart first.

Rather have it built?

Our in-house development team led by Tim Morris converts Pine Script indicators and strategies to MT4 and MT5. You get a free quote and a fixed price before you pay, with the source code included. Details are on our Pine Script to MQL5 conversion service page.

Risk disclaimer: Forex and CFD trading carries a high level of risk and may not be suitable for all traders. The strategies and indicators described in this article are educational. Past performance does not guarantee future results. Always test on a demo account before risking real capital.

Frequently asked questions

Can I connect TradingView to MT5 for free?

Partly. Rebuilding an open-source Pine Script in MQL5 yourself costs only time. The webhook route needs Essential or a higher paid plan, because the free Basic plan has no webhook notifications and no alerts on indicators or strategies (checked 18 November 2026). Add the bridge and VPS costs.

Can I use TradingView indicators in MT5?

Not directly. Pine Script runs on TradingView and MT5 runs MQL5 programs, so an indicator has to be rebuilt in MQL5 from its source code. Invite-only and protected scripts hide that code, so ask the author for the source or an official MT5 version; copying the visible signals by eye produces a guess, not a conversion.

Is there a free Pine Script to MQL5 converter?

Not one you can trust unchecked. Online tools and AI chatbots will turn Pine code into MQL5, and since MT5 build 6060 (23 July 2026) MetaEditor’s AI Assistant can generate MQL5 programs and flag errors. Treat any output as a first draft that still needs compiling, checking against the Pine version and testing on demo.

Can MT5 receive a TradingView webhook directly?

No, not with MQL5’s own functions. MQL5 can send requests out with WebRequest and sockets, but has no function for accepting an incoming connection. Bridges put a server in the middle for the webhook to land on, and the EA on your terminal connects out to collect each message.

Is a TradingView to MT5 bridge safe?

Only as safe as its setup. If your webhook URL leaks and the bridge does not check a secret token, anyone with the URL can send orders to your EA. Keep both private, never put your MT5 password in the alert message, and test every symbol and lot size on demo first.

Can I log in to my MT5 account on TradingView?

Not as a general feature. TradingView’s trading panel connects accounts at brokers that integrate with it, and that is often a separate account type rather than your MT5 login: Tickmill’s connection, for example, uses its Trader Raw account. Ask your broker which account connects; MT5 is not involved either way.

Does TradingView to MT4 work the same way?

Mostly. You can rebuild the script in MQL4 instead of MQL5, or use a bridge that supports MT4; TradingConnector, for example, says it forwards alerts to MT4 or MT5. MQL4 has WebRequest but no socket functions, and broker integrations skip MT4 entirely, because they connect TradingView to the broker account itself.

Do I need a VPS to connect TradingView to MT5?

For the bridge and for any EA, yes in practice: MT5 has to be running whenever an alert can arrive. A rebuilt indicator that only plots and alerts while you watch the chart does not need one, and broker integrations run between TradingView and your broker without MT5.

Explore forex broker accounts

Visit these broker websites to check the account options, regional availability and terms that apply to you before opening an account.

Trading forex and CFDs carries a significant risk of loss and is not suitable for everyone. Broker links are affiliate links; we may earn a commission if you use them.

SuperNeura trading tool: get it free

LEAVE A REPLY

Please enter your comment!
Please enter your name here